Description
Pureresin Ultra Soft W is a flexible resin washable with water. Pureresin Soft W is suitable for DLP or LCD/LED 3D printers. The use of high-quality raw materials creates a high-performance resin that can be processed with very short curing times.
Features
Very short curing times
High level of detail
Sharp edges
Smooth object surfaces
Water washable
Flexible
Packaging
Pureresin Ultra Soft W is supplied in a light-protected HDPE bottle with a content of 0.5 kg.
Storage
The resin should be stored in a dark, cool and dry place. Avoid direct sunlight and temperatures above 30°C to ensure the longest shelf life possible.
Security
Read the safety data sheet carefully and follow the safety instructions. Use resin only in a well-ventilated area. Wear nitrile gloves and safety glasses when working with resin.
In treatment
It is essential to shake the resin before each treatment in order to obtain a homogeneous mixture. During storage, color particles may settle to the bottom of the bottle.
Exposure time:
Base layers: 15-40s
Remaining quarters: 1.5 to 15 s
Pureresin Ultra Soft W can be cleaned with water after printing. The uncured resin dissolves in water. Never leave the printed part in the water bath for more than 15 minutes to avoid damaging the printed part. Contaminated water must be disposed of in accordance with local chemical disposal regulations and must not be discharged down the drain.
Colour
The colour number and RAL designation are for illustrative purposes only and are not intended to represent an exact specification. The effective colors are always in the color range similar to the mentioned RAL color. Full compliance with the mentioned RAL colour is not guaranteed.
Viscosity 25°C 1200Pa*s
Density 20°C 1.132g/cm3
Stretch voltage (DIN EN ISO 527) -MPa
Elongation at break (DIN EN ISO 527) -%
Breaking voltage (DIN EN ISO 527) 1.34MPa
Elongation at break (DIN EN ISO 527) 1,7
Shore A 76
Shore D –
Reviews
There are no reviews yet.