ABS-Like Resin V2

Description

Instructions for use:

(1) Before use:
Shake the liquid resin before use;
Clean the resin tank and moulding platform to maintain the light transmission of the resin tank bottom.
(2) When using:
Unscrew the cap and add it to the resin tank according to the equipment requirements;
Select the correct print parameters and settings for printing.
(3) After use:
After printing, please use the corresponding tools for post-processing, including the blade, diagonal pliers, tweezers, containers, gloves; ethanol (≥95%), lactate or isopropyl alcohol cleaning solution;
(4) Post-processing steps:
A. Remove the printed model from the moulding platform using a blade;
B. Immerse the model in the cleaning solution, rinse or wash it with ultrasound, then remove and drain it; ANYCUBlC Wash and Cure machines are recommended to ensure a better effect.
*** Translated with www.DeepL.com/Translator (free version) ***
C. Proper treatment, such as support removal, polishing, coloring, etc.

Precautions
The ideal storage conditions for uncured resin are in a cool, dark place at room temperature and away from light, avoiding high temperatures or sunlight.
The recommended operating temperature is 18–35°C. Too low a temperature may affect the printing effect; the resin can therefore be preheated correctly before use (no more than 60°C).
If the resin pigment settles, it can be used after stirring or shaking.
To ensure the resin performs well, please remove the model promptly after cleaning to prevent it from soaking in water for a long period of time.
To ensure the mechanical properties of the model, please carry out post-baking within a certain time after cleaning and drying.
To ensure optimal performance of the curable material, it is necessary to control the intensity and duration of the light source after curing:
(1) The intensity of the mercury lamp or LED light source is 5 to 10 mW/m² and the duration does not exceed one hour (self-regulating);
(2) Sun exposure time (summer) is approximately 1 hour;
(3) Proximity to or prolonged exposure to intense light sources, such as high-pressure mercury lamps, is prohibited.
(4) It is recommended to print in a dark room or cover with a lid during printing, as resin is a photosensitive material.

Ps: Material properties vary depending on moulding equipment, post-curing method, and testing equipment. For safety information, please refer to the safety data sheet for this product. If you encounter any problems during use, please do not hesitate to contact us.