Description
Enhanced resilience for improved impact resistance
Anycubic’s ABS-Like Pro 2 resin is designed with enhanced tensile strength and flexural strength, offering the perfect balance between strength and resilience. It is ideal for structural components, sturdy jigs and industrial prototypes.
Further details
This Anycubic resin is designed for speed and quality. Its low viscosity and excellent flow reduce waiting times between layers, thereby improving printing efficiency. Rapid bubble dissipation ensures a high level of detail and a smooth surface finish. Thanks to its excellent adhesion to the build plate, you can rely on its stability to minimise print failures.
A pleasant printing experience
Anycubic’s specially formulated resins emit minimal odour during printing. This creates a non-irritating, comfortable and safer working environment for every user.
A range of colours
Available in a range of colours, these resins retain their vibrancy even after prolonged exposure to the elements.
Wide compatibility
Compatible with all 405 nm UV-curing LCD/DLP 3D printers on the market, whilst delivering optimal print performance when used with Anycubic LCD 3D printers.
Examples of use
Recommended print settings
| Printer model | Layer thickness | Exposure time | Extinguishing time | Lower exposure time | Bottom layers | Anti-aliasing level | Lifting distance Z | Lifting Speed Z | Retraction speed Z |
| Photon P1 | 0,05 mm | 2 s | 2 s | 25 s | 1 | 4 | 5 mm | 3 mm/s | 3 mm/s |
| Photon Mono M7 Max | 0,05 mm | 2 s | 0,5 s | 30 s | 5 | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M7 Pro | 0,05 mm | 2 s | 1 s | 25 s | 4 | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M7 | 0,05 mm | 2,2 s | 1 s | 35 s | 4 | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono 4 Ultra | 0,05 mm | 2,6 s | 1 s | 30 s | 5 | 1 | 5 mm | 8 mm/s | 8 mm/s |
| Photon Mono 4 | 0,05 mm | 2,8 s | 1 s | 30 s | 5 | 1 | 6 mm | 4 mm/s | 6 mm/s |
| Photon Mono M5s Pro | 0,05 mm | 3,6 s | 1 s | 30 s | 5 | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M5s | 0,05 mm | 3 s | 0,5 s | 25 s | 5 | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M5 | 0,05 mm | 2,8 s | 0,5 s | 25 s | 6 | 1 | 8 mm | 6 mm/s | 6 mm/s |
Color Type
Instructions for use
(1) Before use: shake the liquid resin before use; clean the resin tank and the moulding platform so that the bottom of the resin tank remains clear.
(2) When using: unscrew the cap and add the resin to the tank in accordance with the equipment specifications; select the appropriate print settings and parameters.
(3) After use: following printing, please use the appropriate tools for post-processing, including a scalpel, diagonal forceps, tweezers, containers and gloves; ethanol (≥95%), a lactate-based cleaning solution or isopropyl alcohol;
(4) Post-processing steps:
A. Remove the printed model from the build platform using a blade;
B. Immerse the model in the cleaning solution, rinse it or clean it using an ultrasonic cleaner, then remove it and allow it to drain; we recommend using the ANYCUBlC Wash and Cure machines to ensure the best results.
C. Carry out the appropriate treatments, such as removing supports, polishing, staining, etc.
Precautions
The ideal conditions for storing uncured resin are in a cool, dark place at room temperature, away from light, to avoid high temperatures or exposure to sunlight.
The recommended operating temperature is between 18 and 35 °C. If the temperature is too low, this may affect the print result. It is therefore possible to preheat the resin before use (to a temperature not exceeding 60 °C).
If the pigment in the resin settles, simply stir or shake it before use.
To ensure the resin performs as intended, please remove the model promptly after cleaning to prevent it from remaining soaked in water for an extended period.
To ensure the model retains its mechanical properties, please carry out post-curing promptly after cleaning and drying.
To ensure the curing material performs to its full potential, it is necessary to monitor the intensity and duration of the light source after curing. Therefore, the following steps are recommended:
(1) The intensity of the mercury lamp or LED light source is between 5 and 10 mW/m², and the duration does not exceed 1 hour (self-regulating);
(2) Exposure time to the sun (in summer) is approximately 1 hour;
(3) Prolonged or close-range exposure to powerful light sources, such as high-pressure, high-power mercury lamps, is prohibited.
(4) It is recommended that you print in a dark room or cover the printer with a lid whilst printing, as the resin is a light-sensitive material.
P.S.: The properties of the material may vary depending on the moulding equipment, post-curing method and testing equipment. For safety information, please refer to the safety data sheet (SDS) for this product. If you encounter any issues during use, please do not hesitate to contact us.
Reviews
There are no reviews yet.