PC-ABS V0

6.00 CHF36.00 CHF


Printing temperature: 250 – 270°C
Heating mat: 100°C
Specific density: 1.18gr./cc.
Traction module: 2400mpa. (Young’s module)
Elongation at break: 62%
Temp. Vicat softening: 110°C
Flame retardant (UL-94 V0)
Halogen-free
Superb interline grip
Glossy surface
Stable printing process

Description

https://mcpp-3dp.com/pc-abs-v0/

The PC-ABS V0 is available in 1 color. Samples of 50gr. are available. Make your choice!

PC-ABS V0 is a halogen-free flame retardant filament that meets the UL-94 V0 standard. Even though the PC content is high, for optimal adhesion between layers and dimensional accuracy, PC-ABS V0 prints at the same temperature as ABS. A perfect solution in case self-extinguishing properties are needed for your printed objects.

Directions for use:
– The recommended temperature for the heating mat is + 100°C. We recommend using a hook like the EZ Stick (for any type of parts), an adhesive such as Kapton (for small parts), glue (for large parts), or even both (Kapton and glue). If you use glue, no need to put it on the entire surface of the part, but only on the contours or areas at risk of retraction.
– The PC-ABS V0 can be used on all filament deposition 3D printers.

Storage tips:
– Our filaments are filmed, in a cardboard box without window filmed also to ensure the good conservation of the product until the moment of use.
– Store it in a cold and dry environment (15 – 25 ° C), away from light (UV) and under vacuum (to stay dry). We recommend that, after each use, you vacuum it by slipping a silica gel pouch into it and in its box protected from UV. Good storage significantly increases the shelf life of your filament.

Size:
Size Ø Round tolerance
1.75mm. ± 0.05mm. ≥ 95%

Physical properties:
Specific density: ISO 1183 – 1.18gr./cc.
MFR 260ºC/5kg. : ISO 1133 – N.A.
Tensile strength: ISO 527 – 65.1mpa.
Elongation at break: ISO 527 – 62%
Traction module: ISO 527 – 2400mpa.

Thermal properties:
Temp. Printing: DF – 260 ± 10°C
Temp. Vicat softening: ISO 306 – 110°C
Flammability class: UL-94 – V0

Click here to get the data sheet
Click here for the safety data sheet

Additional information

Weight N/A
Dimensions N/A
Extrusion diameter

1.75 mm.

Weight

0.5 Kg., 50 gr.

Color

Black – RAL 9017

Reviews

There are no reviews yet.

Show only reviews in English (0)

Be the first to review “PC-ABS V0”

Your email address will not be published. Required fields are marked *