ABS GF10

Description

The use of high quality raw materials creates a 3D printer filament that is particularly easy to process. Thanks to a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing printing results with all FDM 3D printers. Each reel is sealed in a high quality bag.

– Made in Switzerland

– small tolerances of diameter and roundness

– easy to print

Acrylonitrile butadiene styrene is a copolymer in which, among other things, butadiene is grafted onto the molecular chains. This makes ABS much more impact-resistant than before the modification. An additional 10% glass fibres are added to increase rigidity.

ABS GF10 shrinks less than non-reinforced ABS and is therefore much easier to print because the material deforms much less and therefore adheres better to the print bed. Other advantages of fibreglass reinforcement are higher hardness, heat resistance and significantly higher tensile strength.

The disadvantage of fibreglass reinforcement is its lower elongation at break. In addition, fibreglass causes increased abrasion in the nozzle. We therefore recommend using a hardened steel nozzle for printing large objects. A smell develops when ABS filament is melted. Ensure that your printer is in a well-ventilated area and avoid breathing in these vapours. Ensure that no one who is sensitive to chemicals, children or pets remain in the room for long periods of time.

– Very high rigidity
– Heat resistant up to 100°C
– High hardness
– Low warping
– Low shrinkage

Click here to obtain the technical data sheet in English
Click here for the technical data sheet in German