Anycubic’s plant-based resins are eco-friendly and biodegradable resins. They will guarantee you prints of extraordinary quality without posing a risk to your health and our environment.
They are made from soybean oil, do not contain chemicals harmful to health such as VOCs or BPA and comply with the safety standard EN 71-3:2013.
With the resin dye set (and preferably transparent resin), you can create the perfect color for all your desires!
They are suitable for any LCD technology 3D printer (can be used on SLA or DLP technology, but may lose some of their qualities) with a wavelength between 355 and 410nm. (recommended 405nm.)
Bottle content: 1000ml.
Material: Biodegradable resin + photoinitiators
Curing wavelength: 355 – 410nm. (recommended 405nm.)
Curing time: 5 – 10sec.
Hardness: 84 D
Flexural strength: 59-70mpa.
Tensile strength: 36-52mpa.
Viscosity (25°C): 150-300mpa.s
Liquid density: gr./cm3
Solid density: 1.05-1.25gr./cm3
Elongation at break: %-20%
Product quality guarantee: 1 year
Advice for use:
When handling the resin, we recommend protecting yourself with gloves, a mask and goggles to avoid any accident.
Shake well before each use.
When using it, avoid dust, humidity, keep an ambient temperature between 20 – 25°C and avoid exposing it to direct sunlight.
Excess resin remaining in the tray after printing should not be reused or stored until filtered, residual cured resin may reside there and damage your FEP film or UV LCD when adjusting the tray. printing or printing.
Keep resin out of reach of children and animals.
Do not drink, in case of oral absorption, promptly consult a doctor.
Do not put in contact with the eyes, in case of contact with the eyes, rinse quickly and thoroughly with water and consult a doctor promptly.
Keep the resin in its original bottle tightly closed.
Do not store resin already in use without first filtering it.
Keep an ambient temperature between 15 – 30°C.
The lower the temperature, the higher the viscosity of the resin will be.
The recommended shelf life is 1 year, beyond that, the product may lose its quality.