BioTEC

Description

The use of high quality raw materials creates a 3D printer filament that is particularly easy to process. Thanks to a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing printing results with all FDM 3D printers. Each reel is sealed in a high quality bag.
– Made in Switzerland
– small tolerances of diameter and roundness
– easy to print

The bioTEC material has been specially developed for high performance applications.
After heat treatment at 80°/2h, the material is heat resistant up to 110°C. In addition, this process increases the hardness of the printed object.
Despite the positive thermal and mechanical properties, it is a very easy filament to print. A hot plate is not absolutely necessary and odour emissions are very low.
BioTEC is made from 100% renewable raw materials such as sugar beet and sugar cane. The material is therefore 100% biofilament according to ISO EN 16785-1 under the certificate number DIC-00001. BioTEC polymers comply with the EN-13432-Defect standard. The raw material for the bioTEC filament was obtained from Vinçotte (OK Compost S478) and European Bioplastics 7W2030 for compostability down to an approved thickness of 1.0 mm. This filament meets the compositional requirements of the European regulation 10/2011 on plastic materials for food contact.

Characteristics:
– Does not fade
– High heat resistance up to 110°C
– Low shrinkage/warping
– 100% from renewable raw materials
– Low water absorption
– High UV resistance
– Low flammability

Material: BioTEC
Diameter: 1.75 +/- 0.05 mm
Weight: 1kg
Nozzle temperature: 190-230°C
Printing table temperature: 50-65°C

BioTec technical data