Description
The use of high quality raw materials creates a 3D printer filament that is particularly easy to process. Thanks to a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing printing results with all FDM 3D printers. Each reel is sealed in a high quality bag.
– Made in Switzerland
– small tolerances of diameter and roundness
– easy to print
In general, PET-G is characterised by its clarity/transparency, odour neutrality and robustness.
Nevertheless, PET-G is very easy to print and there are no major problems. These properties, combined with high impact resistance, excellent flexibility and near-zero shrinkage values, make PET-G an excellent material for FDM 3D printing.
Only before processing, there is one very important point to consider. PET-G must be well pre-dried to prevent the material from bubbling and breaking down during processing. This also affects the storage of used filament rolls. These must be stored dry and airtight (moisture can seriously damage the filament). It is advisable to add small drying bags (silica) to the packed roll. If the filament is found to be “damp” during processing, it can be dried in an oven at 80°C for 2h-4h. This filament meets the compositional requirements of European regulation no. 10/2011 on plastic materials intended for contact with food.
Characteristics:
– High hardness, strength and excellent rigidity
– Good resistance to cold
– Low coefficient of friction, high abrasion resistance
– Application range from -40°C to +100°C
– Good electrical insulation properties
– high friction resistance
– Physiologically harmless
– PET is resistant to stress cracking
– Weather and hot air resistant
– Inflammable
– PET is resistant to water at room temperature, dilute acids, neutral and acid salts, alcohol, ether, oils, greases, perchlorinated, aromatic and aliphatic hydrocarbons.
– PET is not resistant to alkalis, superheated steam, ketones, phenols, esters, oxidising acids and chlorinated hydrocarbons.
Reviews
There are no reviews yet.