Self-levelling type BLTouch
Input voltage: 5V
Dimensions: 90 x 70 x 40mm.
Cable size 2pin: 15cm. with female connector
3pin cable size: 15cm. with female connector
Size 2pin extension: 80cm. with socket to socket connector
Size 3pin extension: 80cm. with female-to-female connector, one of which is independent
Supplied with: 5pin male replacement, 2 spring replacements, 2 fixing screws, 2 washers, 2 nuts and a replacement head
The main functions and controls of the Touch 3D Printer are the same as most automatic bed levelling sensors, which consist of an RC servo and a micro switch, so the Touch 3D Printer can be used on almost any 3D printer control board.
By using a solenoid and a progressively designed hall sensor, it can incorporate high precision into such a simple structure. To make it more user-friendly and to bring you a more pleasant printing experience, we add many smart features such as self-test, false alarm, alarm trigger and test mode for M119.
Pulling/pushing hard on the push pin can damage the touch sensor and make it less accurate. Fix the push pin with the locking paint after reassembling or adjusting the core. Do not remove or deform the elastic material attached to the pin.
Simple, intelligent and precise features. It could work with almost any type of bed material, such as glass, wood, metal, etc.
Right pin 1 x 5 pins
2 x Screw and nut and washer
1 x 80cm extensions