Description
General
Pureresin Soft W is a water-washable flexible resin. Pureresin Soft W is suitable for use with DLP or LCD/LED 3D printers. The use of high-quality raw materials results in a high-performance resin that can be processed with very short curing times.
Properties
- Very short curing times
- High precision of details
- Sharp edges
- Smooth object surfaces
- Water washable
- Flexible
Packaging
Pureresin Soft W comes in a 0.5kg or 1kg HDPE bottle protected from light.
Storage
The resin should be stored in a dark, cool and dry place. Avoid direct sun exposure and temperatures above 30°C to ensure the longest possible shelf life.
Security
Read the safety data sheet carefully and follow the safety instructions. Use resin only in a well-ventilated area. Wear nitrile gloves and goggles when working with resin.
Treatment
It is imperative to shake the resin before each treatment to obtain a homogeneous mixture. During storage, ink particles may settle to the bottom of the bottle. Exposure time: Base layers: 15-40s Remaining layers: 1.5-15s
Pureresin Soft W can be cleaned with water after printing. The uncured resin dissolves in water. Never leave the printed part for more than 15 minutes in a water bath to avoid damaging the printed part. Contaminated water must be disposed of in accordance with local chemical disposal guidelines and must not be disposed of in pipes.
Colour
The RAL colour number and designation are for reference purposes only and should not be an exact specification. The effective colors are always in a similar color range to the mentioned RAL color. A complete match with the mentioned RAL colour is not guaranteed.
Viscosity 25°C 962Pa*s
Density 20°C 1.13g/cm3
Stretch voltage (DIN EN ISO 527) -MPa
Elongation at break (DIN EN ISO 527) -%
Breaking voltage (DIN EN ISO 527) 1.5MPa
Elongation at break (DIN EN ISO 527) 3,2
Shore A 81
Shore D –
Reviews
There are no reviews yet.